Red Giant Series

New for this season the Red Giant Series as been developed to out perform and out last cheap imports.  Available in either 12kw or 20kw versions both offer fulland half heat settings, overtemp protection and an optional thermostat.  Designed with affordability in mind this range is ideally suited to light industrial applications such as small warehouses and industrial units.  As with everything we make these heaters are built to last and a tough steel body gives them the durability missing from the competition.


FF12 FF20
Nominal Heat Output 12.7kW 20kW
Supply 400v 16a 3ph 400v 32a 3ph
HxWxD (mm) 425x345x295 460x390x400
Max Airflow 1200m3/hr 1850m3/hr
Weight 15kG 20kG


Blue Giant Series

Previously known as the FF3, FF9 and FF18 this is the flagship and  most popular series in the range.  Defined by its large heat output, whisper quiet operation and unrivalled durability the Blue Giant Series has become industry standard over the last few years and can be found in many of the continents most established hire fleets.

However we understand that if you're not moving forward you're going backwards.  So with that in mind the Blue Giant Series has been upgraded this year with a number of unique features:

29kW of heat from a 32a supply, 14kW from a 16a supply and 4.5kW from a 13a supply.  NO OTHER RANGE OFFERS THIS.
The ability to heat up to four area's from one heater or deliver warm air down 15m of ducting


FF3 FF13 FF29
Nominal Heat Output 4.5kW 13.9kW 28.9kW
Supply 115v/230v  32a/13a 1ph 400v 16a 3ph 400v 32a 3ph
HxWxD (mm) 360x300x330 380x300x450 570x400x520

Max Airflow/Pressure

423m3/hr 80pascals 1017m3/hr 400pascals 2028m3/hr 400pascals
Weight 10kG 18kG 36kG
Max Duct/Outlets 3m/1 5m/2 10m/4


Super Giant Series

When large quantities of portable heat are required the Super Giant Series is without pier.  Already a familiar face in Airbus' huge manufacturing plants and EDF sites across the continent, with its brick out house construction and powerful heat delivery system the FF42 can pump up to 43kW of heat down 20m of duct.  The 1/2" steel construction means it's left standing no matter what and this year sees it come with full phase protection and a 5m x 16mm armoured mains cable.

What isn't so familiar is its new big brother, the FF125.  With a jaw dropping 125kW heat delivery at 5000pa and a single pass temperature increase of 100C it was originally designed to help start the giant turbines in E.on's power stations.  This beast of a heater is now being made available to general industry and full details will be released soon.


FF42 FF100+
Nominal Heat Output 43kW 100+kW
Supply 400v 63a 3ph 400v 125a 3ph
HxWxD (mm) 1000x700x1100 1000x700x2500
Max Airflow/Pressure 4000m3/hr 800pascals 5000m3/hr 5000pascals
Weight 113kG Approx 500kG
Max Duct Lenght 20m 40m+
Mains Cable 5m 16mm2 4 core Appliance Inlet
Phase Protection Yes Yes
30 Years Experience